Veracruz FWD V6-3.8L (2009)
Rear Door Panel: Service and Repair
Replacement
Door Trim Replacement
NOTE:
-
Take care not to scratch the door trim and other parts.
-
Put on gloves to protect your hands.
1. Remove the delta inner cover (A).
2. Remove the inside handle cover (A).
3. Loosen the door trim (C) mounting screws. release the clips that hold the door trim, then remove the door trim by pulling it upward. disconnect the
power window switch connector (A) and door courtesy lamp connector (B).
4. Disconnect the inside handle cable assembly (A).
5. Installation is the reverse of removal.
NOTE:
-
Make sure of connectors is plugged in properly and each rod is connected securely.