Veracruz FWD V6-3.8L (2009)
20. Install the oil pump chain cover (A).
Tightening torque
9.80 - 11.76Nm(1.0 - 1.2kgf.m, 7.23 - 8.68lb-ft)
21. After rotating crankshaft 2 revolutions in regular direction (clockwise viewed from front), confirm the timing mark.
NOTE:
Always turn the crankshaft clockwise.
22. Install the timing chain cover.
(1) The sealant locations on chain cover and on counter parts (cylinder head, cylinder block, and lower oil pan) must be free of engine oil and
ETC.
(2) Before assembling the timing chain cover, the liquid sealant TB1217H should be applied on the gap between cylinder head and cylinder block.
The part must be assembled within 5 minutes after sealant was applied.
Bead width :2.5mm(0.1in.)
(3) After applying liquid sealant TB1217H on the timing chain cover.
The part must be assembled within 5 minutes after sealant was applied.
Sealant should be applied without discontinuity.
Bead width :2.5mm(0.1in.)
