Veracruz FWD V6-3.8L (2009)
24. Install the drive belt auto tensioner (A).
Tightening torque
Bolt(B) : 81.39 - 85.32N.m
(8.3 - 8.7kgf.m, 60.03 - 62.93lb-ft)
Bolt(C) : 17.64 - 21.56N.m
(1.8 - 2.2kgf.m, 13.02 - 15.91lb-ft)
25. Install the drive belt idler (A).
Tightening torque
52.92 - 57.82Nm(5.4 - 5.9kgf.m, 39.06 - 42.67lb-ft)
26. Lower the engine assembly by using the jack.
27. Using SST (09231-3C100), install timing chain cover oil seal.
28. Using SST (09231-3C300) install the crankshaft damper pulley (A).
Tightening torque
284.2 - 303.8N.m (29.0 - 31.0kgf.m, 209.76 - 224.22lb-ft)
