Veracruz FWD V6-3.8L (2009)
(8) Connect the water hoses (B) to the ETC and PCV(C) hose.
(9) Connect the ETC connector (A) and knock sensor connector (B).
(10) Connect the PCSV connector (A), the MAP sensor connector (B) and the PCSV hose.
(11) Disconnect the RH CMPS (A) and the OTS connector (B).
(12) Install the wiring harness protector (E) and connect the LH ignition coil connector (A), the injector connector (B), the condenser connector (C)
and the ground (D).