Veracruz FWD V6-3.8L (2009)
NOTE:
-
Clean the contact face before assembly.
-
Always use a new bolt(C) and gaskets(B).
2. Install the 4 bolts and the pump pulley(A).
Tightening torque
7.84 - 9.80Nm (0.8 - 1.0kgf.m, 5.78 - 7.23lb-ft)
3. Install the drive belt(A).
4. Fill with engine coolant.
5. Start engine and check for leaks.
6. Recheck engine coolant level.