hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Assist Door Module (ADM)|Page 3271 > < Assist Door Module (ADM)|Page 3269
Page 5
background image

6. AUTO DOOR UNLOCK

(1) It selecting one among AUTO DOOR UNLOCK (connecting to driver's seat), AUTO DOOR UNLOCK (taking out the key), AUTO DOOR

UNLOCK (connecting to a speed lever), AUTO DOOR UNLOCK (not application), using breakdown diagnosis, driver can use AUTO DOOR
UNLOCK function. (Default acts by AUTO DOOR UNLOCK (not application), and remembers selected function in CAN Message since.
AUTO DOOR UNLOCK (connecting to a speed lever) function is applied in North America.)

7. AUTO DOOR UNLOCK (CONNECTING TO DRIVER'S SEAT)

(1) It output UNLOCK in case of driver's DOOR UNLOCK KNOB change to UNLOCK from LOCK in all DOOR CLOSE states(0.5 ±0.1sec).

AUTO DOOR UNLOCK(connecting to driver's seat) input condition at AUTO DOOR UNLOCK (CONNECTING TO A SPEED LEVER)
output is ignored.

8. AUTO DOOR UNLOCK (TAKING OUT THE KEY)

(1) In IGN KEY SWITCH ON ( KEY IN ON (BCM) or ACC ON (BCM) or IGN1 ON (BCM) or IGN2 ON (BCM) or IGN2 ON (DDM) ) state,

among all (FL, FR, RL, RR) DOOR UNLOCK KNOBs, if one DOOR LOCK is state that KEY is taken off ( IGN KEY SW OFF (KEY IN
OFF (BCM) & ACC OFF (BCM) & IGN1 OFF (BCM) & IGN2 OFF (BCM) & IGN2 OFF (DDM)) UNLOCK output. (0.5±0.1sec)

9. KEY REMINDER

A. When the Door Warning Switch is ON (receiving state with CAN) and the FL door or FR door is opened (receiving state with CAN), the Door

Lock function shall not be performed.

(1) CONDITION 1

(2) CONDITION 2

(3) CONDITION 3

Assist Door Module (ADM)|Page 3271 > < Assist Door Module (ADM)|Page 3269