Veracruz FWD V6-3.8L (2009)
Fuel Filler Neck: Service and Repair
Removal
1. Remove the bracket (A) near the fuel tank air filter.
2. Disconnect the fuel filler hose (A) and the ventilation hose quick-connector (B).
3. Disconnect the leveling hose quick-connector (A).
4. Remove the rear-LH wheel & tire, and the inner wheel house .
5. Remove the bracket mounting nuts (A) and remove the filler-neck assembly.
Installation
1. Install the filler-neck assembly in according to the reverse order of "REMOVAL" procedure.