Veracruz FWD V6-3.8L (2009)
(5) Transitions from Foot lamp ON state:
Condition 1
Condition 2
Condition 3
NOTE:
-
Following as INHIBIT P Logic value, BCM sends the INH P state via CAN.
-
Foot lamp's brightness can be changed by diagnostic values.
23. POWER WINDOW TIMER
(1) FUNCTION Description
A. POWER WINDOW RELAY CAN signal is switched ON(1) when IGN1 SWITCH On.
B. When IGN1 SWITCH is turned Off, the POWER WINDOW RELAY CAN signal remains On for 30sec and then is turned OFF(0).
