Veracruz FWD V6-3.8L (2009)
7. Fix the wire with tape to the transaxle case as shown in the figure.
NOTE:
Be sure to secure the wire with tape so that it will not interfere with the valve body assembly.
8. Remove the 2 speed sensor wires (A) from the solenoid clamp.
9. Fix the 2 speed sensor wires with tape to the transaxle case as shown in the figure.
NOTE:
Be sure to secure the 2 speed sensor wires with tape so that they will not interfere with the valve body assembly.
10. Remove the 2 bolts to remove the suction cover (A) and the gasket.
11. Remove the 6 bolts as shown in the figure.