Veracruz FWD V6-3.8L (2009)
Transmission Speed Sensor: Testing and Inspection
Output Speed Sensor
Inspection
NOTE:
Refer to Input speed sensor's Removal & Installation in order to inspect the output speed sensor (SP).
CAUTION:
-
Do not damage the output speed sensor (SP).
-
Do not damage the terminals.
1. Connecting terminal 2 to a battery positive terminal, connect the battery negative terminal to terminal 1 through resistance of 100Ohms and
ammeter.
2. Measure currency value when shaking metalshards (magnetic material) back and forthwith a top of input speed sensor (NIN) (less than 5mm).
Specification [mA] :
12-16 (HIGH), 4-8 (LOW)