hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Assist Door Module (ADM)|Page 207 > < Assist Door Module (ADM)|Page 205
Page 6
background image

NOTE:
Headlamp low output includes condition on switches and also by AUTO LIGHT.

9. FOLLOW ME HOME FUNCTION

Due to the change of law for North American variant, tail lamp should be ON as long as head lamp is ON. Tail lamp can't be turned OFF when
head lamp is ON.
After switching off ignition, you generate a call of headlight (head lamp low and tail lamp) and open driver side door and then after close driver
door, you will have consequently lighting of head lamp low and tail lamp during 30sec.

NOTE:

1. Door Lock 2 times : Tx Door Lock 2 times or Passive Door Lock 2 times
2. When Open the Driver door, former 2 times lock counter is cleared, and Start new 2 times lock counting
3. During active the Follow-me-home function(counting 30sec), if Driver door is re-opened, re-start 20min counter and if Driver door is re-close,

re-start 30sec counter.

10. FLASHER BUZZER Operation

When the BCM detects the TURN LEFT SIGNAL or TURN RIGHT SIGNAL transition, then starts flasher buzzer outputs depend on transition.

Assist Door Module (ADM)|Page 207 > < Assist Door Module (ADM)|Page 205