Veracruz FWD V6-3.8L (2009)
Air Bag: Removal and Replacement
Components and Components Location
Components
Repair Procedures
Removal
1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2. Remove the following parts.
A. Rear Seat, Luggage side trim
B. Rear pillar trim, Room trim
3. Disconnect the Curtain Airbag harness connector.
4. After loosening the mounting bolts and nuts remove the curtain airbag.
Installation
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable and wait for at least three minutes.
3. Install a Curtain Airbag (CAB) on the mounting bracket.
4. Tighten the CAB mounting bolts and nuts.