Veracruz FWD V6-3.8L (2009)
3. Remove the third seat lower anchor.
4. Remove the luggage side trim.
5. Remove the C-pillar upper trim.
6. Remove the upper anchor (A).
7. After loosening the retractor (B) mounting bolt, remove the rear seat belt (C).
8. Installation is the reverse of removal.
Third Seat Belt Relacement
1. Remove the following items first.
A. Rear seat assembly.
B. Rear door scuff trim.
C. Transverse trim.
2. After loosening the mounting bolt, remove the lower anchor (A).
3. After disconnect the cover (A), remove the luggage side trim.
4. After loosening the mounting bolt, remove the upper anchor (D).
5. After loosening the retractor (B) mounting bolt,remove the rear seat belt (C).
