Veracruz FWD V6-3.8L (2009)
19. Locate the telescope limit switch's pins.
S - Red with white stripe
T - Black with white stripe
U - Brown with white stripe
PROCEDURE:
1. Open the driver's door and partially remove the front door weatherstrip (A) bordering the dash pad side cover as shown.
2. Remove the dash pad side cover.
3. Remove the knee bolster cover retaining screw (C) and release the cover lock (D). Lower the knee bolster cover by pulling straight out and down.
4. Remove all of the harness connectors leading to the multi-switch panel.
