Veracruz FWD V6-3.8L (2009)
2. Remove the dash pad side cover.
3. Remove the knee bolster cover retaining screw (C) and release the cover lock (D). Lower the knee bolster cover by pulling straight out and down.
4. Remove all of the harness connectors leading to the multi-switch panel.
NOTE:
Some of the connectors on this switch panel are physically identical in shape. Pay special attention to the color of the connector body and the various
colored control stickers on the switch housings (i.e. the green connector body goes to the connector housing with the green control sticker, etc.)
5. Remove the knee bolster by removing the (4) 10mm bolts (F) as shown.
6. Remove the steering column shroud by first removing the (3) screws (G) as shown.
