Veracruz FWD V6-3.8L (2009)
15. Using the appropriate tool, remove the tilt limit switch wires from the connector.
16. Insert the new limit switch's pins into the connector body as shown, pin for pin.
NOTE:
Firmly insert the pins, until a confirmation 'click' is heard and felt.
P - Red with white stripe
Q - Black with white stripe
R - Brown with white stripe
17. Lock the connector pins on the tilt motor connector by pushing the connector pin lock back in place. Reconnect the tilt motor connector and install
the tilt motor connector to the connector bracket.
18. Using the appropriate tool, lift up the telescope motor connector's pin lock as shown and set it aside.
