Veracruz FWD V6-3.8L (2009)
14. Locate the tilt limit switch's wires (P, Q, R) on the back of the tilt motor connector as shown.
P - Red with white stripe
Q - Black with white stripe
R - Brown with white stripe
15. Using the appropriate tool, remove the tilt limit switch wires from the connector.
16. Insert the new limit switch's pins into the connector body as shown, pin for pin.
NOTE:
Firmly insert the pins, until a confirmation 'click' is heard and felt.
P - Red with white stripe
Q - Black with white stripe
R - Brown with white stripe