Veracruz FWD V6-3.8L (2009)
4. Unscrew the tie-rod (B) from the rack bar (A).
5. Remove the lock nut (A) and yoke plug (B) and then pull out the yoke spring (C) and support yoke (D).
6. Remove the pinion plug (A) and lock nut (B).
7. Remove pinion housing (C) and the valve assembly (D).
8. When the end of the clip (C) comes out of the notched hole of the housing rack cylinder, turn the rack stopper (A) counterclockwise and remove
the clip.
9. Remove rack stopper (A) and rack bush (B) from the rack housing.