Veracruz FWD V6-3.8L (2009)
14. Assemble the lock nut (A) and tie rod end (B) to tie-rod.
15. Install the feed tubes (A) to steering gear box.
Installation
1. Install the steering gear box (A) to the sub-frame by tightening the mounting bolts.
Tightening torque :
90 - 110kgf.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)
2. Install the pressure tube (A) and return tube (B) to the steering gear box and then tighten the flare nut.
Tightening torque :
12 - 18kgf.m (1.2 - 1.8kgf.m, 9 - 13lb-ft)
3. Install the heat protector (A).
