Veracruz FWD V6-3.8L (2009)
10. Apply the liquid gasket to the thread of tie-rod ball joint (B) and then install it to the rack bar (A).
Tightening torque Nm (kgf.m, lb-ft):
80 - 100N.m (8.0 - 10.0kgf.m, 58 - 72lb-ft)
11. Apply the silicon grease to the portion (D) of the tie-rod.
12. Apply the liquid gasket to the bellows mating surface of the rack housing.
13. Assemble the bellows (C) to rack housing and then tighten the bellows clip (A) and band (B).
14. Assemble the lock nut (A) and tie rod end (B) to tie-rod.
15. Install the feed tubes (A) to steering gear box.
