Veracruz FWD V6-3.8L (2009)
Tightening torque Nm (kgf-m, lb-ft) :
98.1 - 117.7 (10 - 12, 72.3 - 86.8)
8. Install the tie rod end ball joint (C) to the knuckle (D).
9. Install the castle nut (B) and the split pin (A).
Tightening torque Nm (kgf-m, lb-ft) :
23.5 - 33.3 (2.4 - 3.4, 17.4 - 24.6)
10. Install the brake caliper (B) and then tighten the mounting bolts (A).
Tightening torque Nm (kgf-m, lb-ft) :
73.5 - 83.4 (7.5 - 8.5, 54.2 - 61.5)
11. Install the washer (C), castle nut (B) and split pin (A) to the front hub assembly.
Tightening torque Nm (kgf-m, lb-ft) :
196.1 - 274.6 (20 - 28, 144.7 - 202.5)
CAUTION:
The washer (C) should be assembled with convex surface outward when installing the castle nut (B) and split pin (A).
