Veracruz FWD V6-3.8L (2009)
4. Using the SST(09495-3K000), secure the boot bands.
Clearance (A): 2.0 mm (0.079 in.) or less
5. To reassemble the dynamic damper, keeping the shaft in the straight, tighten the dynamic damper with dynamic damper band, as the illustration.
Distance (L): 228.4 - 228.6mm (8.99 - 9.00in)
6. Install the PTJ boot bands and PTJ boot.
7. Install the trunnion assembly (A) and the circlip (E) to the spline (C) on the driveshaft.
At this time align the marks (D) each other.
8. Install the clip to the PTJ case (B).
9. Add the specified grease to the PTJ as mush as wiped away at inspection.
10. Install the PTJ boots.
