Veracruz FWD V6-3.8L (2009)
1. Temporarily install the transfer case assembly to the transaxle and then tighten the six mounting bolts (A).
Tightening torque :
62-67 Nm (6.2-6.7 kgf.m, 44.8-48.5 lb-ft)
2. Install the four mounting bolts (A) of the transfer case bracket.
Tightening torque :
47-51 Nm (4.7-5.1 kgf.m, 34.0-36.9 lb-ft)
3. Remove the filler plug (A).
4. After refilling the fluid amount of the specified, tighten the filler plug.
Specification :API GL-5, SAE 75W/90
Quantity :Approx 0.8L
5. Install the right driveshaft to the transfer case. (refer to Drive shaft in DS group)
6. Install the propeller shaft (A) to the transfer case.
Tightening torque :
50-70 Nm (5.0-7.0 kgf.m, 36.2-50.6 lb-ft)
