Veracruz FWD V6-3.8L (2009)
4. After refilling the fluid amount of the specified, tighten the filler plug.
Specification :API GL-5, SAE 75W/90
Quantity :Approx 0.8L
5. Install the right driveshaft to the transfer case. (refer to Drive shaft in DS group)
6. Install the propeller shaft (A) to the transfer case.
Tightening torque :
50-70 Nm (5.0-7.0 kgf.m, 36.2-50.6 lb-ft)
7. Install the front muffler (A). (refer to Intake And Exhaust System in EM group)
Tightening torque :
40-60 Nm (4.0-6.0 kgf.m, 28.9-43.4 lb-ft)
8. Connect the (-) terminal to the battery.
Coupling Assembly
Components
