Veracruz FWD V6-3.8L (2009)
1. Install the transfer drive gear with the taper roller bearings(47366-39000 and 47465-39000) into transfer housing.
2. Applying the preload(100 to 200N) to bearings, measure the dimension J.
3. Measure the dimension H on transfer cover(47314-24000).
4. Select the spacer thickness from the chart below. Thickness S4= H-J+K. (K: Bearing preload = 0.07 to 0.11mm. )
Corresponding preload torque(measured without seals) : 120 to 180Ncm.
