XG 350 V6-3.5L (2002)
Brake Master Cylinder: Service and Repair
Removal and Installation
REMOVAL
1. Detach the brake tubes from the master cylinder, and then install the plug.
CAUTION: Do not allow brake fluid to remain on a painted surface. Wash it off immediately.
2. Remove the master cylinder mounting nuts and then lift out the master cylinder.
INSTALLATION
1. Inspection the length of output rod and adjust (8.25 ±0.125 mm).
2. Install the master cylinder to the brake booster.
3. Connect the brake tubes to the master cylinder.
4. Fill brake reservoir with brake fluid and bleed the system.