XG 350 V6-3.5L (2002)
2. Remove the fuel pump installation screws, then remove the fuel pump assembly from the fuel tank
3. Remove the fuel return hose and line.
4. Remove the fuel vapor hose and line
INSTALLATION
1. Install the fuel vapor hose and return hoses.
-
If the fuel line has a stepped section, connect the fuel hose to the line securely, as shown in the illustration.
-
If the fuel line does not have a stepped section, connect the fuel hose to the line securely.
2. Install the fuel filter and tighten the fuel filter bracket.
3. Tighten the two fitting nuts while holding the fuel filter nuts.
Tightening torque
Fuel filter fitting nuts
20 - 40 Nm (300 - 400 kg.cm, 22.1 - 29.5 lb.ft)
4. Install the clips and make sure that they do not interfere with other components.
