XG 350 V6-3.5L (2002)
ECM SPECIFICATION TABLE
CAUTIONS BEFORE REPROGRAMMING:
1.
Conduct reprogramming with the ignition key in the "ON" position.
2.
Be careful not to disconnect any cables connected to the vehicle or Hi-Scan Pro during reprogramming.
WARNING
If reprogramming is interrupted, the manual update procedure must be used.
3.
Do not start the engine during reprogramming.
4.
Do not turn the ignition key off during reprogramming.
WARRANTY INFORMATION
Information
NOTE
Verify that the vehicle is affected by identifying the vehicle production date and VIN.
Automatic Update Procedure
1.
Remove the current system software card from the Hi-Scan Pro and insert the reprogramming software card into the Hi-Scan Pro top slot.
2.
Connect the reprogramming adapter to the Hi-Scan Pro.
3.
Connect the red 10-pin connector to the reprogramming adapter.
4.
Connect power to the Hi-Scan Pro from the cigarette power adapter.
