XG 350 V6-3.5L (2002)
The ETACS Control Module is located beneath the instrument panel on the far left hand corner.
The IMS Control Module is located beneath the driver's seat. It stores the position of the driver's seat and both outside rearview mirrors.
The IMS Memory Module is located in the driver's door switch box.
IMS PANEL CONTROL FUNCTIONS:
^
AUTO - When this button is "ON", the drivers seat will automatically move rearward when the key is removed from the ignition (unless the seat is
already at the rear position). It will return to the original position when the key is inserted into the ignition switch. The parking brake must be set the
entire time.
^
STOP - Temporarily cancels the memory function.
^
M - The memory button prepares the system to record either of two preset adjustments for the driver's seat and both outside mirrors.
^
1 - The storage location for the first memory setting. Pressing this button with the key on moves the drivers seat and both outside mirrors to the
memorized positions.
^
2 - The storage location for the second memory setting. Operation is identical to memory position "1".
TO MEMORIZE THE DRIVING POSITION:
1.
Turn the ignition key "ON".
2.
Adjust the driver's seat and outside rearview mirrors to the desired position.
3.
Push the "M" button on the IMS until a signal beep is heard.
4.
Within five seconds, push button "1" or "2" until a signal beeps twice.
NOTE:
The beep sounds mean that the positions are memorized in the IMS.
TO ACTIVATE THE MEMORIZED POSITION:
