XG 350 V6-3.5L (2002)
4. Install the needle bearing in the gear housing using the special tool(09222-21100).
5. Set the scribed side of the oil seal (inner) in the special tool(09431 -11000)and install in the gear housing.
CAUTION:
1. Note the direction of the oil seal.
2. Use a new oil seal.
6. Apply the specified fluid to the entire surface of the rack bushing oil seal.
Recommended fluid Power steering fluid (PSF-3)
7. Install the oil seal on the rack bushing.
8. Apply the specified fluid to the entire surface of the O-ring and install to the rack bushing using the special tool (09431-11000).
9. Apply the specified grease to the rack teeth.
Recommended grease Multipurpose grease SAE J310a, NLGI grade #2 EP
CAUTION: Do not plug the vent hole in the rack with grease.