XG 350 V6-3.5L (2002)
4. Remove the shock absorber mounting bracket.
INSTALLATION
1. When installing the rear shock absorber, be sure to clear the connecting surface.
1 of 2
2 of 2
2. Tighten the components below to the specified torque as follows.
Disassembly and Reassembly
DISASSEMBLY
1. Using the Special Tools (J38402, A-20), compress the coil spring until there is only a little tension on the strut.
NOTE: Do not use an impact gun.
2. Remove the self-locking nut at the top end of the shock absorber.
3. Remove the shock absorber mounting bracket, dust cover, spring upper pad.
4. Remove the special tool, and then remove the coil spring.
INSPECTION
1. Check the rubber parts for damage or deterioration.
2. Check the spring for correct height deformation, deterioration or damage.
