XG 350 V6-3.5L (2002)
AUTOMATIC TRANSAXLE OIL LEAK BEHIND TORQUE
CONVERTER
This bulletin supersedes TSB 01-40-021 to include additional models.
DESCRIPTION:
Some transaxles may experience an oil leak in the bellhousing behind the torque converter. If this occurs, the oil leak will be observed at the drain hole
on the lower surface of the transaxle.
REPAIR DIAGNOSIS:
If you are servicing a vehicle with an oil leak in the bellhousing area behind the torque converter, refer to the table below to determine the proper repair
procedure:
REPAIR PROCEDURE:
1.
Remove the transaxle.
2.
Remove the torque converter.
3.
Use a suitable tool to remove the oil seal.
