XG 350 V6-3.5L (2002)
Torque Converter: All Technical Service Bulletins
A/T - Torque Converter Inspection
Group: TRANSAXLE
Number: 04-40-021
Date: DECEMBER, 2004
Model:
ALL MODELS
ALL YEARS
Subject
AUTOMATIC TRANSAXLE TORQUE CONVERTER
INSPECTION
DESCRIPTION
Prior to installation, please inspect all transaxle torque converter mounting holes according to the Repair Procedure shown below.
REPAIR PROCEDURE
1.
Loosen the l4mm bolt securing the shipping strap to the transaxle. Remove the bolt that secures the shipping strap to the torque converter. Check if
the bolt is a "Star" bolt, (M10 x 1.25 x 11 mm, P/N 42121-21720):
^
IF NOT, discard the bolt
^
IF SO, retain the bolt
2.
Use a light to inspect all the mounting bolt holes and threads for:
^
An interference mark at the bottom of the hole indicating the existing bolt or a previous bolt has bottomed out and damaged the torque
converter.
^
Stripped threads caused by a bolt with incorrect threads.