XG 350 V6-3.5L (2002)
1. Apply multipurpose grease to the center bearing and inside the center bearing bracket.
2. Using the special tool (09495-33100), press the center bearing into the center bearing bracket.
3. Apply multipurpose grease to the rear surface of all dust seals.
Recommended grease: LIG-2 or Sunlight No. 2
Inner dust seal: 7 - 10 g (0.25 - 0.35 oz.)
Outer dust seal: 4 - 6 g (0.14 - 0.21 oz.)
4. Using the special tool, tap in the outer dust seal and inner dust seal in that order until they are flush with the edge of the center bearing bracket.