EX35 AWD V6-3.5L (VQ35HR) (2009)
2. Route the vinyl string under the vehicle, and then pull and fix it on the point approximately 1.0 m (39.3 in) to the front and rear of the vehicle
through the points FM0 and RM0 using packing tape.
Target line preparation procedure 1
3. Put the points FM and RM (mark) 75 cm (29.5 in) from the points FM0 and RM0 individually.
4. Route the vinyl string through the points FM and RM using a triangle scale, and then fix it at approximately 1.5 m (59 in) on both sides with
packing tape.
5. Put the points FL, FR, RL, and RR (mark) to both right and left [vehicle width / 2 + 30 cm (11.8 in)] from the points FM and RM.
Target line preparation procedure 2
6. Draw the lines of the points FL - RL and FR - RR with vinyl string, and fix it with packing tape.
7. Put a mark on the center of each axle, draw vertical lines to the lines of the points FL - RL and FR - RR from the marks on the center of the axle
using a triangle scale, and then fix the lines using packing tape.
Target line preparation procedure 3