EX35 AWD V6-3.5L (VQ35HR) (2009)
CAUTION:
-
When installing door parting seal, check that blind clips are securely fitted in panel holes on body, and then press them in.
-
When installing, check visually the fillet molding and the clips, then replace them with new parts if they have been damaged.
-
Replace double-faced adhesive tape on back of rear door parting seal (front) with a new tape if rear door parting seal (front) is reused.
-
Remove double-faced adhesive tape remaining on body and back of rear door parting seal (front) using double-faced adhesive tape
remover when removing rear door parting seal (front).
-
Never wash the vehicle with in 24 hours after installing so as to keep adhesive.