EX35 AWD V6-3.5L (VQ35HR) (2009)
Headliner: Service and Repair
Removal and Installation
HEADLINING
NORMAL ROOF : Removal and Installation
REMOVAL
1. Remove rear seat cushion and seat back. Refer to See: Seats/Service and Repair/Rear Seat/Removal and Installation.
2. Remove front seat belt anchor bolt (LH/RH). Refer to See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Front Seat
Belt/Exploded View.
3. Remove rear seat belt anchor bolt (LH/RH). Refer to See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Rear Seat
Belt/Exploded View.
4. Remove luggage side lower finisher (LH/RH), luggage side upper finisher (LH/RH). Refer to See: Service and Repair/Luggage Floor
Trim/Removal and Installation.
5. Remove front pillar garnish (LH/RH), front kicking plate (LH/RH), center pillar lower garnish (LH/RH), center pillar upper garnish (LH/RH),
front body side welt (LH/RH), rear body side welt (LH/RH), rear kicking plate (LH/RH). Refer to See: Trim Panel/Service and Repair/Body Side
Trim.
6. Disconnect roof harness connectors (A) and clips (B), then remove the roof harness.
7. Remove front roof finisher mounting pawls with remover tool (A), then remove front roof finisher (1).
8. Remove the front camera finisher (1) mounting pawls with a remover tool (A), then remove the front camera finisher.