EX35 AWD V6-3.5L (VQ35HR) (2009)
Power Supply and Ground Circuit
POWER SUPPLY AND GROUND CIRCUIT
BCM (BODY CONTROL MODULE) BCM (BODY CONTROL MODULE) : Diagnosis Procedure
1.CHECK FUSE AND FUSIBLE LINK
Check that the following fuse and fusible link are not fusing.
Is the fuse fusing?
YES - Replace the blown fuse or fusible link after repairing the affected circuit if a fuse or fusible link is blown.
NO - GO TO 2.
2.CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM connectors.
3. Check voltage between BCM harness connector and ground.
Is the measurement value normal?
YES - GO TO 3.
NO - Repair or replace harness.
3.CHECK GROUND CIRCUIT
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES - INSPECTION END
NO - Repair or replace harness.
Component Function Check
DOOR LOCK AND UNLOCK SWITCH
DRIVER SIDE : Component Function Check