EX35 AWD V6-3.5L (VQ35HR) (2009)
Power Seat Motor: Testing and Inspection
RH
Component Function Check
POWER RETURN MOTOR
RH : Component Function Check
1.CHECK FUNCTION
Check that the rear seatback (RH) rises when pressing and holding the power return switch (RH) or rear seatback switch (RH) in UP direction.
Is the inspection result normal?
YES - Power return motor (RH) is OK.
NO - Refer to See: Diagnosis Procedure.
Diagnosis Procedure
POWER RETURN MOTOR
RH : Description
Operate the rear seatback.
POWER RETURN MOTOR
RH : Diagnosis Procedure
1.CHECK POWER RETURN MOTOR (RH) INPUT SIGNAL
1. Turn ignition switch OFF.
2. Check voltage between power return motor assembly (RH) harness connector and ground.
Is the inspection result normal?
YES - Replace power return motor assembly (RH) [seat device assembly (RH)]. Refer to See: Service and Repair/Rear Seat/Exploded View.
NO - GO TO 2.
2.CHECK POWER RETURN MOTOR (RH) CIRCUIT
1. Disconnect rear seatback power return control unit connector and power return motor assembly (RH) connector.
2. Check continuity between rear seatback power return control unit harness connector and power return motor assembly (RH) harness connector.
3. Check continuity between rear seatback power return control unit harness connector and ground.