EX35 AWD V6-3.5L (VQ35HR) (2009)
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace harness.
4.CHECK POWER RETURN SWITCH (LH)
Check power return switch (LH). Refer to See: LH/Component Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Replace power return switch (LH). Refer to See: Service and Repair/Power Return Switch/Removal and Installation.
5.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
- INSPECTION END
Component Inspection
POWER RETURN SWITCH
LH : Component Inspection
1.CHECK FRONT POWER RETURN SWITCH (LH)
1. Turn ignition OFF.
2. Disconnect power return switch (LH) connector.
3. Check power return switch (LH) terminals.
Is the inspection result normal?
YES - Power return switch (LH) is OK.
NO - Replace power return switch (LH). Refer to See: Service and Repair/Power Return Switch/Removal and Installation.
Component Function Check
POWER RETURN SWITCH
RH : Component Function Check
1.CHECK FUNCTION
Check that the rear seatback (RH) rises when pressing and holding the power return switch (RH).
Is the inspection result normal?
YES - Power return switch (RH) is OK.
NO - Refer to See: RH/Diagnosis Procedure.
Diagnosis Procedure
POWER RETURN SWITCH
RH : Description
Switch that performs the return operation.
POWER RETURN SWITCH
RH : Diagnosis Procedure
1.CHECK REAR SEATBACK POWER RETURN CONTROL UNIT INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect power return switch (RH) connector.
3. Check voltage between power return switch (RH) harness connector and ground.