EX35 AWD V6-3.5L (VQ35HR) (2009)
Is the inspection result normal?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK REAR SEATBACK SWITCH (RH) CIRCUIT
1. Disconnect rear seatback power return control unit connector.
2. Check continuity between rear seatback power return control unit harness connector and rear seatback switch (RH) harness connector.
3. Check continuity between rear seatback power return control unit harness connector and ground.
Is the inspection result normal?
YES - Replace rear seatback power return control unit. Refer to See: Power Seat Control Module/Service and Repair/Removal and Installation.
NO - Repair or replace harness.
3.CHECK REAR SEATBACK SWITCH (RH) GROUND CIRCUIT
Check continuity rear seatback switch (RH) harness connector and ground.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace harness.
4.CHECK REAR SEATBACK SWITCH (RH)
Check rear seatback switch (RH). Refer to See: RH/Component Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Replace rear seatback switch (RH). Refer to See: Service and Repair/Rear Seatback Switch/Removal and Installation.
5.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
- INSPECTION END
Component Inspection
REAR SEATBACK SWITCH
RH : Component Inspection
1.CHECK REAR SEATBACK SWITCH (RH)
1. Turn ignition switch OFF.
2. Disconnect rear seatback switch (RH) connector.
3. Check rear seatback switch (RH) terminals.