EX35 AWD V6-3.5L (VQ35HR) (2009)
Seat Heater Switch: Service and Repair
Removal and Installation
HEATED SEAT SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect from damage.
1. Remove the console body assembly. Refer to See: Interior Moulding / Trim/Console/Service and Repair/Removal and Installation
2. Remove heated seat switch (1) from switch bracket. With flat bladed screw driver (A).
NOTE:
The same procedure is also performed for passenger side.
INSTALLATION
Install in the reverse order of removal.