EX35 AWD V6-3.5L (VQ35HR) (2009)
Wheel Speed Sensor: Service and Repair
Sensor Rotor
Exploded View
SENSOR ROTOR
FRONT SENSOR ROTOR : Exploded View
Refer to See: Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Front Wheel Hub and Knuckle/Exploded View (2WD models), See:
Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Front Wheel Hub and Knuckle/Exploded View (AWD models).
Removal and Installation
SENSOR ROTOR
FRONT SENSOR ROTOR : Removal and Installation
REMOVAL
Sensor rotor cannot be disassembled. Remove the sensor rotor together with hub bearing assembly. Refer to See: Maintenance/Wheels and
Tires/Wheel Hub/Service and Repair/Front Wheel Hub and Knuckle/Exploded View (2WD models), See: Maintenance/Wheels and Tires/Wheel
Hub/Service and Repair/Front Wheel Hub and Knuckle/Exploded View (AWD models).
INSTALLATION
Sensor rotor cannot be disassembled. Install the sensor rotor together with hub bearing assembly. Refer to See: Maintenance/Wheels and Tires/Wheel
Hub/Service and Repair/Front Wheel Hub and Knuckle/Exploded View (2WD models), See: Maintenance/Wheels and Tires/Wheel Hub/Service and
Repair/Front Wheel Hub and Knuckle/Exploded View (AWD models).
Exploded View
SENSOR ROTOR
REAR SENSOR ROTOR : Exploded View
Removal and Installation
SENSOR ROTOR
REAR SENSOR ROTOR : Removal and Installation
REMOVAL
-
Follow the procedure below to remove rear sensor rotor.
- Remove side flange. Refer to (2WD), See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final
Drive/Exploded View(AWD).
- Using a bearing replacer (suitable tool) and puller (suitable tool), remove sensor rotor from side flange.
INSTALLATION
CAUTION: