EX35 AWD V6-3.5L (VQ35HR) (2009)
Oil Filter: Service and Repair
Oil Filter
OIL FILTER
Removal and Installation
REMOVAL
CAUTION:
-
Oil filter is provided with relief valve. Use genuine NISSAN oil filter or equivalent.
-
Be careful not to get burned when engine and engine oil may be hot.
-
When removing, prepare a shop cloth to absorb any engine oil leakage or spillage.
-
Never allow engine oil to adhere to drive belt.
-
Completely wipe off any engine oil that adheres to engine and vehicle.
1. Remove engine undercover with power tool.
2. Using oil filter wrench [SST: KV10115801 (J-38956)] (B), remove oil filter.
INSTALLATION
1. Remove foreign materials adhering to oil filter installation surface.
2. Apply engine oil to the oil seal contact surface of new oil filter.