EX35 AWD V6-3.5L (VQ35HR) (2009)
a. Use scraper (A) to remove old liquid gasket from mating surfaces.
-
Remove old liquid gasket from the bolt holes and thread.
CAUTION:
Never scratch or damage the mating surfaces when cleaning off old liquid gasket.
b. Apply a continuous bead of liquid gasket with the tube presser
(commercial service tool) to the oil pan (lower) as shown in the figure.
a : [diameter]4.0 - 5.0 mm (0.157 - 0.197 in)
Use Genuine RTV Silicone Sealant or equivalent. Refer to See: Specifications/Fluid Type Specifications/Recommended Chemical Products
and Sealants.
CAUTION:
Attaching should be done within 5 minutes after coating.
c. Install oil pan (lower).