EX35 AWD V6-3.5L (VQ35HR) (2009)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Removal and Installation
AIR CLEANER AND AIR DUCT
Removal and Installation
REMOVAL
NOTE:
Mass air flow sensor is removable under the car-mounted condition.
1. Disconnect mass air flow sensor harness connector.
2. Disconnect PCV hose.
3. Remove air cleaner case with mass air flow sensor and air duct, disconnecting each joints.
-
Add marks if necessary for easier installation.
4. Remove mass air flow sensor from air cleaner case if necessary.
CAUTION:
Handle mass air flow sensor with the following cares.
-
Never shock mass air flow sensor.
-
Never disassemble mass air flow sensor.
-
Never touch mass air flow sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.