EX35 AWD V6-3.5L (VQ35HR) (2009)
Ambient Light Sensor: Service and Repair
Removal and Installation
Xenon Type
OPTICAL SENSOR
Removal and Installation
REMOVAL
1. Insert an appropriate tool between the optical sensor and the instrument upper panel. Pull out the optical sensor upward.
2. Disconnect the optical sensor connector. And then remove the optical sensor.
INSTALLATION
Install in the reverse order of removal.
Halogen Type
OPTICAL SENSOR
Removal and Installation
REMOVAL
1. Insert an appropriate tool between the optical sensor and the instrument upper panel. Pull out the optical sensor upward.
2. Disconnect the optical sensor connector. And then remove the optical sensor.
INSTALLATION
Install in the reverse order of removal.