EX35 AWD V6-3.5L (VQ35HR) (2009)
High-Pressure Flexible Hose
COOLER PIPE AND HOSE
HIGH-PRESSURE FLEXIBLE HOSE HIGH-PRESSURE FLEXIBLE HOSE : Removal and Installation
REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove engine cover. Refer to See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Cover/Exploded
View.
3. Remove air cleaner case (LH) and air duct (LH). Refer to See: Filters/Air Cleaner Housing/Service and Repair/Exploded View.
4. Remove mounting bolt (A) from high-pressure flexible hose bracket (1).
5. Disconnect one-touch joint between high-pressure flexible hose
(1) and condenser pipe assembly (2) with disconnector (A)
(SST: J-45815).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
6. Remove mounting nut (A) from high-pressure flexible hose (1).
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with suitable material such as vinyl tape to avoid the entry of air.
7. Remove high-pressure flexible hose.
INSTALLATION
Installation is basically the reverse order of removal.