EX35 AWD V6-3.5L (VQ35HR) (2009)
Use Genuine RTV silicone sealant or equivalent. Refer to See: Specifications/Fluid Type Specifications/Recommended Chemical Products
and Sealants.
a. Refer to figure (E) to apply liquid gasket to joint part of camshaft bracket (No. 1) (1) and cylinder head.
b. Refer to figure (H) to apply liquid gasket in 90 degrees to figure.
2. Install rocker cover gasket to rocker cover.
3. Install rocker cover.
-
Check if rocker cover gasket is not dropped from the installation groove of rocker cover.
4. Tighten bolts in two steps separately in numerical order as shown in the figure.
1st step : 2.0 Nm (0.2 kg-m, 18 in-lb)
2nd step : 8.3 Nm (0.85 kg-m, 73 in-lb)