EX35 AWD V6-3.5L (VQ35HR) (2009)
Impact Sensor: Service and Repair
Crash Zone Sensor
Exploded View
CRASH ZONE SENSOR
Exploded View
Removal and Installation
CRASH ZONE SENSOR
Removal and Installation
WARNING:
-
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes or more.
-
Never use the air tools or electric tools for servicing.
REMOVAL
1. Remove the reservoir tank. Refer to See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Removal and Installation.
2. Remove the crash zone sensor fixing nuts.
3. Disconnect the crash zone sensor harness connector.
CAUTION:
-
Never impact the crash zone sensor.